MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
55
Step 7 – Verify the Settings
It's a good practice to verify all of the settings once you've completed the steps.
1.
Touch the Config button on each page and verify the Teensy column is populated with the same numbers as the
Nextion column. Repeat for each axis on each page.
2.
Next verify the Preferences are correct for the Spindle, Axes, Limits, and Returns.
3.
Select the Main page, then the '...' (Preferences) page. Select the More page. Touch EEPROM. Repeat for each
page and axis on the page. This will show all of the settings for the selected page.
A copy of the settings file (4Axes.ini) is on the following pages.
