MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
54
Step 5 – Upgrade the Nextion
Secure the microSD card which has the Nextion configuration file
(from step 2).
Put this microSD card into the Nextion’s microSD card slot.
Reboot the Teensy again.
If this works as expected, it will read
Check Data … 100%
Updated Successed!
(guess that is a bad translation from Chinese).
After that message appear, remove the microSD card from the Nextion, and reboot the Teensy again.
Step 6 - Load the .ini file
Secure the microSD card which has the
4Axes.ini
settings file (from step 3).
Put this microSD card into the Teensy’s microSD card slot.
Start the system and click the
Load ini
button on the Nextion screen.
The Load ini button will turn green, and then it will take off.
Once completed, a message will appear saying
Done – Restart may be needed.
Reboot the system one last time.
