MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
11
Controls Box Enclosure
The assembled box has
4.
A top and bottom made from
¾
” MDF,
5.
Four sides made from
¼
” MDF, and
6.
4 corner posts made from quarter-round trim.
Removing the top reveals the box shown to the right.
The quarter-rounds are used to give the top and bottom
something to set the spacing correctly.
The four
¼
” thick sides are screwed to the top and bottom.
Replacing the top, and removing the sides reveals the view to the
left.
Top
Bottom
Bottom
Side
Side
Si
d
e
Si
d
e
