MDF Rose Engine Lathe 2.0
Build Instructions – Stepper Controls
27
Cabling, part 3
Solder in the cables as noted below.
Cabling for Nextion Display
¡
Tx
White/Green
¡
Rx
White/Orange
¡
GND Orange
¨
+5V
Green
+5V is closest to the J20 label. The rest
are in the order shown in the table.
Cat-5 or higher
•
If connecting thru the panel to the
Nextion HMI display (using a cable
grip on the panel), 7 feet long.
(recommended)
•
If connecting to a panel mount
connector, 8” long.
301
NOTE:
•
Tx on the PCB is
connected to Rx on the
touch screen.
•
Rx on the PCB is
connected to Tx on the
touch screen
