background image

FORMA WOOD CLOSED FIREPLACE 

Chapter 1

 

USE AND MAINTENANCE MANUAL 

page

 6  

 

Warnings and guarantee terms 

Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited 

 

 

1.3.  

GUARANTEE TERMS 

MCZ guarantees the product, 

with the exception of 

parts subject to normal wear specified 

below, for 

two years from the date of purchase, provided that 

proof of purchase is supplied in a document specifying 

the name of the retailer and the date the sale was 

made and that the completed guarantee certificate 

was sent within 8 days of said purchase. The product 

must also be installed and tested by a specialised 

fitter and in accordance with the detailed instructions 

provided in the instruction manual that accompanies 

the product. 
The guarantee covers the replacement or free repair 

of parts recognised as being faulty at source 

due to manufacturing defects. 

1.3.1.  

Guarantee limits 

The aforementioned guarantee does not cover 

electrical parts for which the guarantee period is one 

year from the date of purchase of the product, proven 

as indicated above. The guarantee does not cover 

parts subject to normal wear, such as 

seals, glazing 

and all removable parts of the combustion 

chamber. 

Parts replaced will be guaranteed for the remaining 

guarantee cover period, starting from the original 

date of purchase of the product. 
 

 

The glazing, in particular, is 

guaranteed until an authorised MCZ 

fitter certifies that it was perfectly 

intact at the time that installation 

was completed.

 

 

1.3.2.  

Exclusions  

The guarantee does not cover any parts found 

to be faulty due to negligence, inappropriate 

use, incorrect maintenance or installation not 

performed in compliance with MCZ's 

instructions (see relevant chapters in this use 

manual). 

MCZ cannot be held liable for any damage which may 

- either directly or indirectly - be caused to persons, 

animals or property ensuing from failure to observe all 

the instructions provided in the instruction manual 

and, specifically, the warnings regarding installation, 

use and maintenance of the device. 
Please contact your retailer and/ or local importer in 

the event of product failure. 
Damage caused by transport and/ or handling are not 

covered by the guarantee. 

Refer solely to the manual provided for information 

about product installation and use. 
The guarantee does not cover damage caused by 

tampering with the device, atmospheric agents, 

natural disasters, electrical discharges, fires or faults 

in the electrical and plumbing system. The guarantee 

also excludes damage caused by failure to perform 

maintenance or by maintenance performed incorrectly 

and not in compliance with the Manufacturer's 

instructions. 
 

SERVICE CALL 
Service calls must be made to the 

retailer, who will forward the call to 

the MCZ technical support 

department.

 

 
MCZ cannot be held liable if the 

product and any of its accessories are 

used incorrectly or modified without 

authorisation. 

Only original MCZ spare parts must be 

used for replacements. 

 

 
 

1.4.  

IMPORTANT INFORMATION FOR 

CORRECT DISPOSAL OF THE PRODUCT 

IN ACCORDANCE WITH EC DIRECTIVE 

2002/96/EC 

.

 

 

At the end of its working life, the product must not be 

disposed of as urban waste. 

It must be taken to a special local authority 

differentiated waste collection centre or to a dealer 

providing this service. 

Disposing of a appliance separately avoids possible 

negative consequences for the environment and 

health deriving from inappropriate disposal and 

enables the constituent materials to be recovered to 

obtain significant savings in energy and resources.  

As a reminder of the need to dispose of appliances 

separately, the product is marked with a crossed-out 

wheeled dustbin. 

Summary of Contents for FORMA WOOD 75 DX-SX































Reviews: