FORMA WOOD CLOSED FIREPLACE
Chapter 4
USE AND MAINTENANCE MANUAL
page
16
Installation and assembly
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
4.
INSTALLATION AND ASSEMBLY
IMPORTANT!
The closed fireplace must be positioned and
connected to the smoke duct only by a qualified
technician so that all local and national regulations
are met.
In all cases, the appliance must be installed in
accordance with standard UNI 10683.
When you unwrap the closed fireplace
make sure that every part is
in perfect
working order and check for any damage caused
during transport. The carrier or retailer must be informed
immediately of any damage.
If the closed fireplace is installed in a place that is difficult to access,
the weight can be lightened by removing the internal elements making
up the combustion chamber.
However, we recommend that each
part be correctly repositioned by qualified staff.
MCZ bears no responsibility for failure to adhere to the above
warning.
4.1.
PREPARATION AND UNPACKING
Open the packaging, remove the closed fireplace from the pallet and
position it in the chosen place, taking care to ensure that it complies
with the specifications.
The closed fireplace must always be handled
VERTICALLY and only using trolleys. Do not drag the
unit as this may damage the support feet.
Example of closed fireplace packaging
A
B
