MCZ BOXTHERM 70 PELLET, Use And Installation Manual

Page: 30 / 56

A
B
E
C
D
A
B
E
C
D
28
8-LCD REMOTE CONTROL
When the appliance is running and when it is turned off, most of the stove surfaces are very hot (door, handle, glass, smoke
outlet pipes, etc.). Therefore it is recommended to avoid coming into contact with these parts.
GENERAL SPECIFICATIONS OF
THE LCD REMOTE CONTROL
The remote control works at a transmission frequency of 434.5 MHz.
Power the product with 3 AAA batteries as follows:
• Remove the cover of the battery compartment by pressing and lifting the point indicated by the arrow.
• Insert the batteries with the correct polarity (+) and (-).
• Close the cover of the battery compartment.
The time must be set when the remote control is switched on.
The remote control has a special icon on the display to indicate when the batteries are almost flat. If the flat battery icon appears, the
batteries are almost flat and the remote control is about to go off.
Used batteries must be disposed of separately in special containers.
GRAPHIC APPEARANCE
Reference will often be made to the keys shown in the figure. Always keep it at hand for simplicity’s sake.