A
B
C
25
5-ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
ASSEMBLING THE COMPENSATION FRAME
Once the cladding and/or the plasterboard is set up, fit the previously removed compensation frame.
This frame intends to finish and cover the gap between the metal structure of the product and the cladding.
The frame is assembled by simply opening the door of the product, fitting in the frame as shown in the figure and fastening it to the lateral
columns of the structure, inside the door profile, with the four screws supplied.
4-SIDED FRAME
If the product is inserted in an existing chimney or rests on a surface, the 3-sided frame must be fitted, whereas, in the event it is wall-
mounted, the optional 4-sided frame can be used. Assembly is the same for both frames.
A - LATERAL COLUMNS
B - FRAME
C - SCREWS
Summary of Contents for BOXTHERM 70 PELLET
Page 1: ...INSERT BOXTHERM 70 PELLET USE AND INSTALLATION MANUAL EN Translation of original instructions...
Page 54: ......
Page 55: ......
