38
OMM 1008-1
Figure 17, A Typical SETPOINT Screen
The above figure shows the Water screen with Leaving Water Temp setpoint selected. The various setpoint
groups are in a column on the right side of the screen. Each button contains a number of setpoints grouped
together by similar content. The WATER button (as shown) contains various setpoints relating to water
temperature setpoints.
NOTE:
Some setpoints that do not apply to a particular unit application may still be listed on the screen.
They will be inactive and can be ignored.
The numbered buttons in the second from right column are pressed to select a particular setpoint. The selected
setpoint will appear in blue on the screen and a description of it (with the range of available settings) will
appear in the upper left-hand box.
Procedure for Changing a Setpoint
A list of setpoints, their default value, their available setting range, and password authority are in Table 6 on
page 19.
1.
Press the applicable Setpoint Group). (A complete explanation of setpoint content of each group
follows this section.)
2.
Select the desired setpoint by pressing the numbered button.
Initiate
Change
Button
Setpoint
Groups
Compressor
Status
Unit Status
Action
Buttons
Numeric
Keypad
Setpoints
Setpoint
Selection
Buttons
Setpoint
Description
Range of
Settings
