Date of publication: 15.01.2014
Invoice / Job no :
Completed
Not
Completed
Rectified
Completed
Not
Completed
Rectified
3.0 - Carry out interior functional checks
Completed
Not
Completed
Rectified
Completed
Not
Completed
Rectified
FL:
FR:
RL:
RR:
4.2 Measure tread depth (mm)
FL:
FR:
RL:
RR:
Outside
Center
Inside
Completed
Not
Completed
Comments
Completed
Not
Completed
Rectified
6.5 Check all underfloors, tyre spoilers and front/rear guide vanes for damage
Completed
Not
Completed
Rectified
8.0 - Lower vehicle to ground
Completed
Not
Completed
Rectified
Mechanical checks
6.3 Check front/rear ball joints and track rods for play
6.4 Check torque on suspension components
8.1 Check wheel bolt torque values (130Nm)
8.2 Check/adjust fluid level of cooling system
7.0 - Install Engine floor panel - Ref. AA-RM-02A04-04-001
7.1 Inspect wheel rim condition
7.2 Check tyre orientation, damage, and crack formations
7.3 Install wheels - Ref. AA-RM-03B03-01-001
5.4 Check/clean air ducts of brake system
6.0 - Remove Engine floor panel - Ref. AA-RM-02A04-04-001
6.1 Check Engine/Transmission for leaks
6.2 Check condition of drive shafts
5.0 - Remove wheels - Ref. AA-RM-03B03-01-001
5.1 Check front/rear axle wheel bearing play
5.2 Visually check brake pads (replace if necessary)
5.3 Visually check condition of brake discs (Remove and weigh if CCM) - Ref. AA-RM-03C01-01-006
3.2 Check Airbrake function using Dynamic Control Panel
3.1 Check condition and operation of seat belts/buckles (ensure belts are not twisted)
4.0 - Secure/lift vehicle on lifting platform - Ref. AA-RM-02A04-04-005
4.1 Check/enter tyre pressure
Interior function checks
2.0 - Carry out cluster checks
2.1 Check engine oil level - Ref. AA-RM-04F02-01-007
1.2 Check window glazing
1.3 Check fuel filler flap manual opening
1.4 Check/adjust fluid level of brake system (bleed if required) - Ref. AA-RM-03C01-01-005
1.5 Check/adjust fluid level of power steering - Ref. AA-RM-03D01-01-008
1.6 Check windscreen wiper blade condition
1.1 Check exterior lighting function
MP4-12C Coupe
Track Day Event Pre/Post Checks
All checks to be carried out to the vehicle before/after a track day event
Customer :
km / miles :
Vehicle registration :
VIN :
Date :
Colour :
Service Time : 1.25 units (Fe discs) - 2.50 units (CCM discs)
Address :
Vehicle exterior and fluid checks
1.0 - Two technicians will be required for steps 1.1 and 1.2
290
Summary of Contents for MP4-12C
