Completed
Not
Completed
Comments
Completed
Not
Completed
Comments
Completed
Not
Completed
Comments
Completed
Not
Completed
Comments
Underside of vehicle
12.0 - Install all under floors - Ref. AA-RM-02A04-04-001/002/003/005/006/008
12.1 Check tyre orientation, damage, and crack formations
12.2 Replace wheel nut bolts
13.4 Check exhaust emission label (market specific)
13.5 Replace engine spark plugs (only if mileage achieved) - Ref. AA-RM-04F01-01-026
13.6 Check injection/ignition system connections and harness
13.7 Check vehicle steering alignment (adjust as required)
14.0 - Road test (carry out 14.1 and 14.2 whilst on test. Max 30 min / 6 miles)
14.1 Check airbrake function
12.3 Install wheels - Ref. AA-RM-03B03-01-001
13.0 - Lower vehicle to ground
Replace engine spark plugs (Every 90,000 km or 60,000 miles only)
13.1 Check wheel bolt torque values (130 Nm)
13.2 Replace engine ISG (Intake Sound Generator) - Ref. AA-RM-04F01-01-037
13.3 Check corrosion/antifreeze protection and enter here: °C
15.6 Report and rectify all recorded defects
15.7 Check/stamp service and warranty guide
14.2 Check navigation system (if fitted)
15.0 - Finish road test and carry out documents/safety device/final checks
15.2 Check function of all keys, locks, and fobs
15.3 Check for towing eye
15.4 Check expiry dates of fire extinguisher/tyre inflation kit (if fitted)
15.5 Read out fault memory, clear errors, and zero service interval counter via MDS
15.1 Replace key fob battery and clean contacts with Electrolube CCS
273
Summary of Contents for MP4-12C
