manualshive.com logo in svg

McLaren MP4-12C, Maintenance Manual

The McLaren MP4-12C Maintenance Manual provides comprehensive guidelines to ensure the optimal performance and longevity of your extraordinary supercar. Download this invaluable resource for free from manualshive.com, offering user manuals packed with detailed instructions, crucial information, and expert advice for maintaining and preserving your McLaren MP4-12C's exceptional performance.

Share
Download
background image

 

Care 
Point:

Renew Oetiker clips on coolant 
hoses.
Ensure Oetiker clip is positioned 
just outside the positioning mark 
(furthest from engine block).

 

1
.

!

Install all coolant hoses in reverse order.

 

 

Care 
Point:

Maximum fill on a dry vehicle is 25 
litres of coolant (mix ratio of 50:50 
with water).

Care 
Point:

Use MOBIL 1 Anti Freeze EXTRA .

Care 
Point:

Ensure vacuum box is in a higher 
position than the coolant reservoir 
throughout the filling procedure.

Care 
Point:

Ensure all relevant Personal 
Protective Equipment (PPE) is 
worn when carrying out this 
procedure (gloves, goggles, etc).

 

2
.

!

Attach adaptor to coolant reservoir (8).

 

3
.

!

Connect vacuum pump to coolant fill adaptor 
(8).

 

4
.

!

Connect vacuum box to coolant fill adaptor 
(9).

 

5
.

!

Close all valves on vacuum box (Venturi 10, 
Top 11, Lower 12, Fill 13).

 

6
.

!

Attach air line to top box connection (14).

 

7
.

!

Open top and lower valves on the vacuum 
box (11, 12).

 

 

Care 
Point:

Do not exceed a vacuum of 0.5 
bar vacuum at this stage.

 

8
.

!

Gradually open Venturi valve (10) on vacuum 
box to generate vacuum in system.

 

 

Care 
Point:

Vacuum should not drop once top 
valve (11) is closed. If the vacuum 
cannot be held, please check 
system for leaks.

 

9
.

!

Close top valve (11) and ensure system can 
hold a vacuum.

 

10
.  

Release vacuum by closing Venturi valve (10) 
and opening top valve (11).

 

11
.  

Close lower valve (12).

 

 

Care 
Point:

Place open end of filler tube in to 
separate coolant filled container. 
Please ensure a minimum of 10 
litres of coolant (50:50 mix with 
water) is in the separate container.

 

12
.  

Connect filler tube (15) to fill valve (13).

 

13
.  

Open filler valve (13).

 

 

Care 
Point:

Only fill vacuum box to half way 
point.

 

14
.  

Gradually open Venturi valve (10) to draw 
coolant mix into vacuum box.

 

15
.  

Close Venturi valve (10) and fill valve (13) 
once vacuum box is half full. 

 

16
.  

Remove filler tube (15).

 

17
.  

Open lower valve (12).

 

 

Care 
Point:

Ensure vacuum box fill level does 
not exceed sight level.

Care 
Point:

During this stage of the procedure 
do not exceed 0.8 bar vacuum.

 

18
.  

Gradually open Venturi valve (10) to draw air 
out of vehicle coolant system. Continue until 
no bubbles can be seen in the hose 
connecting the vacuum box to the coolant 
reservoir, or the box becomes full.

 

19
.  

Close Venturi valve (10) and allow coolant to 
be drawn into the vehicle.

 

20
.  

Repeat steps 10 

–

 18.

 

21
.  

Detach equipment from vehicle.

 

22
.  

Drain all coolant from vacuum box.

 

23
.  

Repeat steps 2 - 10.

 

 

Care 
Point:

Ensure vacuum box fill level does 
not exceed sight level.

Care 
Point:

During this stage of the procedure 
do not exceed 0.8 bar vacuum.

 

24
.  

Repeat steps 16 

–

 18 using a completely 

empty vacuum box.

 

25
.  

Remove equipment.

 

26
.  

Once vehicle has been filled, carry out a short 
vehicle run up and repeat steps 2 - 24.

 

 

Care 
Point:

Ensure coolant reservoir is filled to 
the minimum level. Once the 
reservoir is at the correct level, 
add an additional 350ml of coolant 
mix.

 

27
.  

Install components in reverse order.

 

167

Summary of Contents for MP4-12C





































































































































































































































































































Reviews:

No comments

Related manuals for MP4-12C

Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Vauxhall 2009 Tigra Quick Reference Manual preview
2009 Tigra
Brand: Vauxhall Pages: 2
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
Hyundai Santa Fe 2019 Getting Started Manual preview
Santa Fe 2019
Brand: Hyundai Pages: 18
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
DriveRight 8156OBD Installation Manual preview
8156OBD
Brand: DriveRight Pages: 16
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Classic Accessories OVER DRIVE PolyPRO 3 Car Cover Instructions preview
OVER DRIVE PolyPRO 3 Car Cover
Brand: Classic Accessories Pages: 2
QA1 MU1RCA Install Instructions preview
MU1RCA
Brand: QA1 Pages: 4
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10
RAM PROMASTER 2021 Owner'S Manual preview
PROMASTER 2021
Brand: RAM Pages: 288
HAUL MASTER 96198 Instructions preview
96198
Brand: HAUL MASTER Pages: 4

Brands by name

Popular brands

Load more brands