31
SETUP, con’t
no components connected to them. If the MX134 is
connected to a McIntosh Multizone System Controller
refer to note 13 on page 5 for additional information
about reassigning Inputs. If an Input Title has been
retitled or switched off from the factory default setting
and there is now a desire to return the Input to the
original Title, press the specific Remote Control Input
that matches the Title, followed by the Number 0 Push
button. This will assure that only the desired Input
Push button will need to be pressed, instead of the Input
Name followed by the Input Number.
Digital Input
There are three Optical Digital Inputs and three Coaxial
Digital Inputs available for assignment with any of the
eleven Analog Audio/Video Inputs. The following example
describes how to reassign Digital Input C, which by default
has been assigned to Input Number 8 LV, over to the newly
created DVD2 Input instead.
9. Using the Up
or Down
directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left
or Right
directional
push-buttons to select the DVD2 Input Number 1. Re-
Figure 16
MENU: INPUT SETUP
SOURCE INPUT
1
TITLE
????
DIGITAL INPUT
NONE
VIDEO POWER
ON
COMPONENT VIDEO
NO
VIDEO CONVERTER IN
OFF
MAIN MENU
Figure 18
MENU: INPUT SETUP
SOURCE INPUT
1
TITLE
DVD2
DIGITAL INPUT
NONE
VIDEO POWER
ON
COMPONENT VIDEO
NO
VIDEO CONVERTER IN
OFF
MAIN MENU
Figure 17
MENU: INPUT SETUP
SOURCE INPUT
1
TITLE
DVD?
DIGITAL INPUT
NONE
VIDEO POWER
ON
COMPONENT VIDEO
NO
VIDEO CONVERTER IN
OFF
MAIN MENU
Figure 19
MENU: INPUT SETUP
SOURCE INPUT
1
TITLE
OFF
MAIN MENU
