16
tion Display, the On-Screen Display on
a Monitor/TV connected to the HDMI or
Component Video output allows more
information to be visible at the same time,
making it easier to navigate through the
choices.
2. When there is a HDMI Output Connec-
tion between the MX121 and a TV/Moni-
tor, the On-Screen Overlays including
Menus, will only appear on the HDMI
Output.
3. Navigating thru and making changes to the Setup
Menus is performed by using the HR078 Remote
Control directional Up
or Down
, Left
or
Right
, ENTER and the MENU Push-buttons.
The Front Panel NAV
(up),
(down),
(left)
or
(right) Push-buttons may also be used.
4. Access the desired Setup Menu or Device Man-
agement (Menu) by pressing the Up
or Down
left
or right
directional push-buttons. Press-
ing the ENTER Push-button will then activate the
highlighted Menu Item.
5. Return to the Main Menu by pressing the RE-
TURN Push-button on the Remote Control. To
exit the SETUP Mode press the RETURN Push-
button again.
Your McIntosh MX121 has been factory configured
with default operating settings allowing for immediate
use. Changes to the default settings are accomplished
with the built-in Setup Feature using On Screen
Menus.
To assist in navigating the various On Screen
Menus please refer to the set of MX121 Menu separate
folded sheets "
MX121-Menu-1 thru Menu-7
"; and to
separate sheets “
Mc4A thru Mc4B
” for Push-button
identifications. These separate sheets are contained in
the Owner’s Manual Packet.
Follow the sequence of SETUP Adjustments as
they appear in this Owner's Manual, as they are
interactive. Some of these adjustments and whether
or not some choices even appear On-Screen are based
on the components connected to the MX121, Source
Input selected and previous
settings made.
1. Press the STANDBY/
ON Push-button on the
Front Panel or press the
ON (Power) Push-button
on the Remote Control to switch On the MX121.
Refer to figures 1 and 3. The Front Panel Infor-
mation Display will first indicate “MX121 A/V
Control Center ” and then the last source selected
“BD Stereo” and volume level setting of "M.VOL.
---.-dB".
2. Press the Push-button, then press the MENU
Push-button to enter the Setup Mode. The words
“*MENU A/V Adjust
” will appear on the Front
Panel Information Display and the On-Screen
"MENU" (Main Menu) will appear on the Moni
-
tor/TV Screen. Refer to figure 2.
Notes: 1. While Setup adjustments can be accom-
plished using the Front Panel Informa-
Introduction to the MX121 Setup Mode
Introduction to the MX121 Setup Mode
Figure 1
Figure 2
Adjust various audio and video parameters
Audio/Video Adjust
Information
Auto Setup
Manual Setup
Input Setup
MENU
Figure 3
HR078
DFR
Summary of Contents for MX121
Page 31: ...31 Setup Mode con t...
