17
SETUP
How to Set On-Screen Messages and FL Display
How to Set On-Screen Messages
This allows you to turn On Screen Messages, that appear in
the upper right corner of the screen, such as PLAY or
STOP On or Off.
Note: If a disc is loaded, the player must be in STOP mode
before any SETUP operation can occur.
1. Press the SETUP pushbutton to access the Initial Setup
Menu. Refer to Figures 3 & 4.
2. Press pushbutton Number 4 to select the On-Screen
Messages Menu. ON will be indicated as the factory
default setting. See Figure 12.
1. Press 1 to select ON.
2. Press 2 to select OFF.
After a selection is made, the Initial Setup Menu will reap-
pear. If all setup adjustments are complete, press
pushbutton Number 0 to exit the Initial Setup Menu.
How to Set FL Display
The MVP831 front panel display, just below the disc tray,
can be adjusted to be Bright or Dim.
Note: If a disc is loaded, the player must be in STOP mode
before any SETUP operation can occur. The other front
panel nomenclature is fixed and will not affected by the
Display adjustment operation.
1. Press the SETUP pushbutton to access the initial setup
menu.
2. Press pushbutton Number 5 to select the FL Display
(Front panel Display Brightness Menu). Bright will be
indicated, which is the factory default setting. See Fig-
ure 13.
1. Press 1 to select Bright.
2. Press 2 to select Dim.
After a selection is made, the initial setup menu will reap-
pear. If all setup adjustments are complete, press
pushbutton Number 0 to exit the Initial Setup Menu.
Figure 12
On Screen Messages
1 On
2 Off
0 Exit
Figure 13
FL Display
1 Bright
2 Dim
0 Exit
