McIntosh MCD7008, Owner'S Manual

Page: 6 / 24

The Mclntosh MCD 7008 Compact Disc Changer offers the ultimate in features and perfor-
mance. The following information highlights what this CD changer can do for you.
1: You can operate the MCD 7008 as a single disc player.
2: You can store up to six discs inside the player, as well as a seventh disc used in single
disc mode. These discs can be played in any of the following ways.
3: Play all the discs from start to finish automatically in the order that they were loaded
into the player.
4; Play any of the discs by direct selection from either the front panel keyboard or the keyboard
on the HR7008 hand held remote controller.
5: After selecting a disc, any track on the disc can be played by direct access on the front
panel keyboard or hand held remote controller.
6: Select Random Play where the player will select discs and various tracks on the discs
in a totally random order. Playback will continue until all tracks on all discs stored in the player
have been played. If only one disc is in the player, each track of that disc will be played in
random order.
7: Select any number of tracks you wish to hear in any sequence, on any or all of the discs
stored in the player. Enter this information into the player's memory. The selected tracks will
then play in the order selected. As long as the discs are left in the player the memory is re-
tained, even if the player is turned off.
8: Review which tracks were selected and stored in the memory, as well as the total time
of the stored tracks.
9: Select repeat, and the player will play through each disc stored in the player and when
finished, start playback again from disc number one and continue playback as long as desired.
10: Scan function causes the player to play only 10 seconds of the first track on each disc
to reveal which discs have been loaded into the player.
11: Playback a 3 inch disc without need for an adapter. (Single disc mode only.)
INTRODUCTION
Before connecting the MCD7008, turn the transport locking screw from the "LOCK" position
to the "FREE" position. This screw is reached through an access hole on the bottom panel of
the player. The player will not operate until the locking screw is turned to the "FREE" position.
For future transport or shipping of the player, remove all discs and turn the unit off. Then
set the transport locking screw to the "LOCK" position.
TRANSPORT
LOCKING
SCREW
5