McIntosh MCD7008, Owner'S Manual

Page: 14 / 24

3: Verify that the track number list of the selected disc is shown on the display panel.
4: Select the first track number you want to memorize by pressing the correct button on the
TRACK keypad. This track number will light on the display panel.
5: Press the ENTER button. The MEMORY indicator will light on the display panel.
Memory number 1 will also light on the display panel indicating that this is the first memory
selection. Only the track numbers memorized will light on the track display panel. The player
memory will accept track numbers up to 99.
6: Repeat steps 2 through 5 to select more discs and tracks in any order you wish.
7: Press PLAY. The player will start playback from the first track selected on the first disc.
Playback will continue through each disc and track selected in the order they were stored
in memory.
A TOTAL OF 50 TRACKS CAN BE PLACED IN PLAYER MEMORY. IF YOU ATTEMPT TO
STORE MORE THAN 50 DISCS IN MEMORY, A DISPLAY INDICATING "FULL" WILL APPEAR.
THE MEMORY WILL BE RETAINED EVEN WHEN THE PLAYER IS TURNED OFF, AS LONG
AS THE MEMORIZED DISCS ARE LEFT IN THE PLAYER.
1: The player must be in the STOP mode.
2: Press the REVIEW button and the memory number, corresponding disc and track number
of the first memory entry will be displayed. Press the TIME MODE button IN and hold it. The
time of the track stored in memory will be displayed. Each time you press REVIEW to check
additional tracks stored in memory, press TIME MODE to indicate the total accumulated time
of all the tracks.
When you press REVIEW for the last track stored, press and hold the TIME MODE button
to read the total cumulative time of all tracks selected.
During playback of the memory stored tracks, the TIME REMAINING mode refers to the
time of the stored tracks.
Track numbers up to 99 can be selected and stored in memory. However, playing time for
track numbers above 32 will not be displayed nor included in the total playing time.
3: Cancel the REVIEW mode by pressing and holding the REVIEW button for more than 2
seconds. The REVIEW mode is automatically canceled if the REVIEW button is not pressed
for an interval of 10 seconds or more.
If you wish to remove ALL the memory data contents, press the CANCEL button and all
the stored memory will be erased. A completely new memory track storage program can then
be created.
13
HOW TO
MEMORIZE AND
SELECT DESIRED
TRACKS FOR
PLAYBACK
HOW TO
REVIEW MEMORY
HOW TO ERASE
ALL STORED
TRACKS FROM
MEMORY