McHale R62-72, Operator'S Instruction Manual, Page: 58 / 63

McHale R62-72 & R68-78 Twin-Rotor Rake
58
Pre-delivery inspection form
PRE-DELIVERY INSPECTION (PDI)
Dealer: .............................................................. Model: R62-72 & R68-78
Full address:...................................................... Serial No:..........................................................
.......................................................................... Date delivered:.................................................
Fitter:................................................................. Date inspected:.................................................
Customer: ........................................................
Full address:..................................................... Tel:....................................................................
.......................................................................... Mobile:..............................................................
.......................................................................... E-mail:...............................................................
ENSURE THAT THE TRACTOR IS OF THE CORRECT SPECIFICATION FOR THIS MACHINE.
REFER TO THE OPERATOR INSTRUCTION MANUAL BEFORE MAKING ANY ADJUSTMENTS!
This machine must be registered on www.mchale.net by the dealer in order to qualify for
warranty!
1.
Check that all accessories are with
the owner/operator. Check operators
instruction manual and parts lists.
9.
Connect hydraulic hosing to the
tractor and ensure proper hydraulic
setup. Main lift ram hydraulic supply
must have float.
2.
Ensure machine is re-assembled
correctly. (Refer to all assembly
instructions supplied)
10.
Check all manual & hydraulic
functions.
3.
Ensure that all items are properly
installed and check all bolts & nuts,
especially wheel nuts, are torqued
correctly.
11.
Check for hydraulic leaks, both
internal (Creep) and external.
4.
Ensure that the wheels are correctly
fitted (i.e. valve to the outside).
Torque wheel nuts correctly.
12.
Check for smooth operation of all
moving parts. Ensure LH and RH rotor
unit cams are functioning correctly.
5.
Check for correct tyre type, tread and
pressure. (Tyre inflation pressure is
1.4 bar (20 psi))
13.
Use extreme caution when working
around sharp tine-points. Always
wear protective clothing and gloves!
6.
Use minimum CAT 2 link pins when
coupling the machine to a suitably
sized tractor.
14.
The operator must be fully aware of all
hazards, controls (hydraulic), all
functions & safety features of both
the machine and the tractor.
7.
Ensure guards, lights and hydraulic
hoses are fitted correctly, before
coupling the machine to a tractor.
15.
Ensure that the owner/operator reads
the operator instruction manual and
understands fully all safety &
operating aspects of the machine, as
described.
8.
When mounted on a tractor check that
the main frame is horizontal. Then
adjust to set the required raking
height.
16.
Instruct operator on maintenance i.e.
check mountings, adjustments and
areas to be greased daily along with
other routine functions.
I am satisfied that the above checks have been carried out, and that the machine is complete with all
accessories and manuals.
Signed:................................................................................... (Dealer) Date:..............................
Signed:................................................................................... (Owner) Date:..............................
A signed copy of this form is to be retained by both the dealer and the customer!