McHale
R62-72 & R68-78
Twin-Rotor Rake
37
Tine replacement should be carried out in the following way:
1.
Lower the rotor arms to the ground and make sure the machine is secure.
2.
Shut down the tractor, remove the key and apply the parking brake.
Check all tines on each arm. Rotate each arm to be worked on, to the rear outer
quadrant of the rotor. Remove the M12 bolt holding on each tine, working from the
outside in. Replace any bent or broken tines and secure using bolts and washers, in
the reverse order of removal. Ensure the outer tines have the tine retainer(s) fitted on
the outer end of each arm. Replace any damaged bolts, washers or retaining clips. All
tines should be in line with each other on any one arm. Check linch pins that lock the
quick fit tine arms in place.
On completion, remove damaged bolts and tines and dispose of responsibly.
6.6 Gearbox oil
There is one oil-filled gearbox on the machine, the PTO Y-drive.
CAUTION: Wear proper safety equipment & follow all instructions
Always wear protective clothing and gloves, beware of sharp edges!
WARNING: Ensure the tractor is shut down before changing oil
Ensure that the tractor engine has been shut down, the key has been
removed from the ignition and the brakes have been applied before
changing oil.
NOTE: Oil must be drained & filled after the first 50 hours of use
After the first 50 hours of use, the gearbox oil must be completely drained
and filled with SAE 80W/90 grade oil.
ENVIRONMENT: Safe disposal of oil
Respect the environment! Never spill oil or grease on the ground, never
pour them down the drain and never discard them where they can pollute
the environment. Always take waste materials to a recycling centre.
Gearbox
Capacity
A (A/F Hex)
B (A/F Hex key)
C (A/F Hex key)
PTO Y-drive
1.5 L
17 mm
10 mm
10 mm