McElroy A714201, Operator'S Manual

Page: 22 / 78

2 - 9
Overview
Stripper Bar
The heater stripper bar can be attached to the heater to assist in
separating the heater from the molten pipe. Refer to the instruction
sheet packaged with the stripper bar for assembly instructions.
TX03095-4-7-10
Insulated Heater Stand
The heater should always be stored in the insulated heater stand
for protection of the operator and to minimize heat loss and risk of
mechanical damage.
The heater is hot and will burn clothing and skin.
Keep the heater in its insulated heater stand or
blanket when not in use, and use care when
heating the pipe.
TX04664-03-24-14
CD013
83-10
-5-15
CD014
03-10
-5-15
Clamp Knobs
Clamp knobs are equipped with a thrust bearing, which permits
the operator to develop high clamping forces with minimal effort.
TX03099-4-12-10
CD013
30
-10
-1-15
Heater Latch (Acrobat 250 and 315)
The heater has a latch that locks the heater to the carriage guide
rod. The latch is actuated by pulling the latch handle into the
heater handle. The latch locks onto the guide rod automatically
when the heater is inserted.
TX04799-12-20-17
CD013
83-10
-5-15