Special Operations - Vertical Fusion (Movable Pipe Below)
4 - 4
Begin Facing
Ensure the carriage is open.
Insert the facer, ensuring the facer handle latches onto the
carriage guide rod.
Turn on the facer.
Assure the pressure selector control is in the facing position.
Move the carriage directional control to close the carriage.
If the facer stalls, adjust the facing pressure so the facer continues
to cut.
Continue facing until both jaws contact the facer stops on both
sides.
Shift the carriage directional control to the neutral position.
Allow the facer to run for several revolutions to ensure that there
are no chips hanging on the end of the pipe.
Turn facer off.
TX04822-05-05-16
CD013
72
-10
-5-15
CD0
23
21-06
-2
0-18
CD013
51-10
-5-15
CD013
52
-10
-5-15
After Facing
Ensure facer has come to a complete stop.
Open the carriage.
Release the handle latch, and lift the facer out.
Remove chips from pipe ends using a clean dry lint free non-
synthetic cloth.
Do not touch faced pipe ends with hands.
Inspect both pipe ends for complete face off. If the face off is
incomplete, return to
Attach Carriage to Pipe
.
TX04823-11-18-15
CD013
53-10
-5-15
Summary of Contents for A714201
Page 78: ......
