Safety
1 - 3
Electrical Safety
Always ensure equipment is properly
grounded. It is important to remember that
if you are working in a wet environment
with electrical devices. Proper ground
connections help to minimize the chances
of an electric shock.
Frequently inspect electrical cords and unit for damage.
Have damaged components replaced and service
performed by a qualified electrician.
Do not pull on or carry electrical devices by the cord
NOTICE
: Always connect units to the proper power source as
listed on the unit, or in the owner's manual. Use GFCI electrical
connections when available or required.
TX04787-02-16-17
WR000
55
-4
-7
-9
3
WR000
25-11-
30
-9
2
Units With Hydraulics
It is important to remember that a sudden hydraulic oil leak can cause
serious injury, or even be fatal if the pressure or oil temperature is high
enough.
Escaping fluid under pressure can penetrate the skin
causing serious injury. Keep hands and body away from
pinholes which eject fluid under pressure. Use a piece
of cardboard or paper to search for leaks. If any fluid is
injected into the skin, it must be immediately removed by a
doctor familiar with this type of injury.
Unwanted movement of the machine could result
in serious injury or damage to machine.
Unwanted
movement of the machine may take place if switches
do not match machine state when the machine power
is turned on.
NOTICE
: Wear safety glasses, and keep face clear of area when
bleeding air from hydraulic system to avoid spraying oil into eyes.
TX03007-04-18-16
WR000
78
-4
-8-9
3
Overhead Loads
The Acrobat fusion carriage is not designed to
support overhead or overhung loads. Adequately
support the pipe using appropriate support
devices. If not supported, overhead loads could
fall causing serious injury or death.
Unclamping jaws in an overhead position could
have jaws swing into the head resulting in serious
injury or death. Support the carriage when
attaching or removing the carriage to pipe.
TX04786-05-05-16
WR0010
2-
03
-2
5-14
Summary of Contents for A714201
Page 78: ......
