McDATA 1U Server, Installation And Service Manual

Page: 28 / 48

1
1-4
1U Server Installation and Service Manual
Configure Network Addresses
1U Server Rear Access Connectors
The following connectors are used during the installation process:
Figure 1-1
1U Server Rear Panel Connections
Configure Network Addresses
Verify the LAN installation. If the server is installed on a dedicated LAN,
network information does not require change. Change the default password
for the server (if required by the customer), then go to
Configure Server
Information
on page 1-6.
If the 1U Server is installed on a public LAN, the default password for the
server and the following transmission control protocol internet protocol
(TCP/IP) network information must be changed to conform to the customer
LAN addressing plan:
• IP address.
• Subnet mask.
Table 1-1
Rear Access KVM and LAN Connections
Location Description
1 Power supply connector
2 VGA connector
Attach the KVM video cable to this connector
3 Keyboard connector
Attach the KVM keyboard cable to this connector.
4 PS/2 mouse connector
If the KVM provides a mouse, attach the mouse cable to this
connector.
5 LAN 1 (public network) connector
6 LAN 2 (private network) connector
7 Phone connector