Installation and use
SOLID CONTROL MCK 2000
18
3.4 Front view
Picture 9. Front view.
The front panel allows the operator to display all the data of the working cycle. The
following elements can be seen on the panel:
REF. DESCRIPTION
A.
ON/OFF main switch for turning the Computer on and off (with green LED)
B.
“
-
“key for
decreasing data to be set
C.
“PROG” key to access the different programming phases
D.
Back-lit display for displaying the parameters
E.
“+” key for increasing data to be set
F.
Tri-stable switch (ON-OFF-ON) for third actuator switch-on (optional)
G.
Section open/close ON/OFF switch (MAIN) with yellow LED
H.
Left section open/close ON/OFF switch with yellow LED
I.
Momentary switch for LH manual adjustment
L.
Key for selecting the left section “field border” function.
M.
Key for selecting the automatic or manual mode with red LEDs.
N.
Key for resetting the counters and totalisers
O.
Momentary switch for right section manual adjustment.
P.
Right section open/close ON/OFF switch with yellow LED.
