Installation and use
SOLID CONTROL MCK 2000
14
3.2.3 Installation of product level capacitive sensor (if present) code
1403
The capacitive sensor for the product level should be positioned so as to verify when
the level of product in the tank decreases and goes below the reserve limit. The
capacitive sensor can be installed inside the seed tank Picture 7 - example 1) by
means of a clamping bracket (not supplied) or it can be directly fixed on the tank
body (Picture 7 - example 2) and fastened with a bolt and a lock nut. The red part of
the capacitive sensor MUST touch the product: so, by positioning the sensor head in
correspondence of the reserve limit, when the sensor is covered by the product
(Picture 7 - ref. <
1
> examples 1 and 2) DOES NOT SEND the alarm signal, but if the
sensor head, while working, remains uncovered (ref. <
2
> examples 1 and 2 Picture
7) the corresponding acoustic (buzzer) and visual (
) alarms will be activated
EXAMPLE 1
: assembly inside the tank
EXAMPLE 2
: assembly on the tank body
Picture 7. How to install the sensor for the product level
ALARM OFF
Granular product
Tank
Reserve
limit
Dropdown floor
ALARM ON
Granular product
Tank
ALARM OFF
Reserve
limit
Dropdown floor
ALARM ON
