44
15. Troubleshooting
By purchasing this CD player, you have acquired a state-of-the-art product which operates reliably. Nevertheless,
problems or malfunctions may occur. For this reason, the following is a description of how you can eliminate possible
malfunctions yourself.
Please observe the safety instructions!
The display is blank after the power switch (1) has been switched on
• The mains cable has not been plugged into the socket correctly.
• The mains cable is not correctly inserted in the mains connection AC IN (24).
The CD is not played
• CD has not been inserted properly.
• The CD is dirty.
• The format of the inserted CD is not compatible.
The CD is played with interruptions
• The CD is dirty.
• The CD is scratched.
• The CD has a manufacturing flaw.
The PITCH slide control (15) does not function
• The PITCH function is deactivated.
No sound audible
• A device in the playback chain is not switched on.
• The wrong input has been selected on the amplifier/mixing desk.
• The volume control of the amplifier/mixing desk is set to „MINIMUM“.
A channel does not function
• An RCA cable has come off from the audio output of the CD player or the amplifier/mixing desk input.
• The balance control is not set correctly on the amplifier/mixing desk.
• The RCA connection cable is faulty.
Repairs other than those described above should only be carried out by an authorised
specialist.
