7
1.1
GLOBAL ASPECTS ABOUT SAFETY
Compliance
with
the
rules
and
recommendations
contained
in
this
publication allows safe use of the machine and
appropriate action.
1) The best performance and maximum life of
the machine will be obtained from the
proper use of the same. It is, therefore,
necessary to scrupulously observe the
instructions contained in this booklet;
2) Any requests for spare parts must be
accompanied by the type of model and
serial number reported in the spare parts
list or applied on the number plates of the
components themselves;
3) The machine installation must be carried
out in compliance with the safety
regulations in force;
4) Do not remove or tamper with the
protections and safety devices, check
periodically their effectiveness;
5) Strictly adhere to the warnings recalled on
the danger postings (pictograms) and keep
the message readable;
6) Operation and maintenance must be
performed by qualified personnel, trained
and authorized to the tasks foreseen.
Intervention
procedures
and
responsibilities of operators must be clearly
defined to ensure safe and proper use and
maintenance;
7) Before any maintenance or adjustment
work, all the power supplies must be
disconnected and locked, ensuring that
they are not subject to unintentional start-
ups;
8) The maintenance of the machine carried
out in a manner that does not comply with
the instructions provided, with non-original
spare parts or without written authorization
by the company that performed the
maintenance of the used machine or in
any case in such a way as to jeopardize
its integrity or modify its characteristics,
exempts the company itself from any
liability concerning the safety of persons
and the faulty operation of the machine.
•
The user shall be required to respect
warning about periodic maintenance
indicated in Chapter 6;
•
The user shall be required to respect the
qualifications
of
the
operating
personnel:
OPERATOR
/
MAINTENANCE
TECHNICIAN
: Performs the tasks
necessary for the basic operation
of the machine: execution of the
work cycle, implementation of operator
commands, other interventions strictly
related to normal production, possible daily
cleaning and inspection, execution of
ordinary maintenance operations (CFR.
CHAP. 6). Strictly operates with safety
devices enabled.
MAINTENANCE
TECHNICIAN
SPECIALIST (RESELLER)
Involved in all the operating
conditions
and
levels
of
protection.
Performs
extraordinary interventions that cannot be
run by the user (See CHAP. 6 about
maintenance).
