25
•
Locate the parts of the machine away
from areas subject to humidity or inclement
weather;
•
Always place between the floor and the
components of the machine, wooden boards
or otherwise, in order to avoid direct contact
with the floor.
•
In the event that a storage of more than
one month is required, protect the unpainted
parts (blades) with anti-oxidant products
based on oils and fats.
3.5
DAMAGE CONTROL
Upon delivery of the machine, it is advisable
that the staff in charge check that it is
complete with all its parts and has not suffered
any kind of damage.
Any
damage
must
be
immediately
reported to the supplier.
The gear unit housing is sealed to the
assembly; if you notice oil leaks, carefully
observe where they come from because there
may be leaks from other sources.
If the leaks come from the gear box,
contact our technical service or a qualified
contractor.
!
ATTENTION
During unloading from the
means of transport and placement
of the machine, the maneuvering
area
is
only
accessible
to
authorized persons.
Do
not
allow
unauthorized
personnel to stand near the
machine
during
the
lifting
operations.
While performing these activities
make use of appropriate PPE
(personal
protection
devices):
safety gloves & footwear
