MBTelehealth – Tandberg MXP Edge 95 User Guide
The Codec (rear view)
RCA Inputs/Outputs
Ethernet
On/Off Switch
S-Video
DVi
Microphone
Connection
Inputs/Outputs
Inputs/Outputs
Connection
3. Ethernet
cable
- This type of cable is similar to the one that connects to the Local
Area Network (LAN). One end is plugged into the back of the codec and the other
end (for MBTelehealth purposes), must be plugged into the specified jack in the wall.
Once the Ethernet cable is plugged in, you will be able to connect, or be connected
to other sites.
4. Microphone
- There are two types of microphones that accompany the
videoconferencing equipment. The first may be located on the equipment and the
second is the table microphone which is designed to be located on a flat surface in
front of the participant. The microphone cable should always face towards the
videoconferencing system. The system will automatically equalize sound levels so
that loud and soft voices are picked up and transmitted to the far end at
approximately the same level.
5. Screen/Monitor
- The videoconferencing equipment may utilize single or dual
screen/monitor configurations. The screen/monitor displays the far end or the near
end image.
Page 4 of 29
