Camera
MBTelehealth – Tandberg MXP Edge 95 User Guide
1.0 OBJECTIVES
This user guide will provide you with an overview of the Tandberg MXP Edge 95 and the
knowledge to setup and use the videoconferencing equipment.
Learning Outcomes:
After reviewing this guide, you should be able to:
1.
Identify and explain the main parts of the Tandberg MXP Edge 95.
2.
Use the remote control to navigate through the Tandberg MXP Edge 95 menus, set
camera presets, and access additional video sources.
3.
Setup and use the equipment.
2.0 THE TANDBERG MXP EDGE 95
The main components of the Tandberg MXP Edge 95 videoconferencing system are the
Camera, Codec, Ethernet Cable, Microphone, Screen/Monitor, Router, Remote Control
and for some units, the Cart.
The Equipment at a Glance
Codec
1. Camera
- The built-in camera is a high quality imaging device which transmits
images to the screen/monitor. The camera movements are controlled by a wireless
infra-red (IR) remote control that controls a variety of functions, both on the near and
far end.
2. Codec
- The codec is the central part of the videoconferencing equipment. The main
task of the codec is the compression of outgoing video, audio and data, the
decompression of the incoming information and the transmission of this information
between endpoints. The name codec comes from a combination of the two words
compression and decompression.
Page 3 of 29
