MBTelehealth – Tandberg MXP Edge 95 User Guide
Patient Camera
11.1 Connection
To connect the patient camera to the Tandberg MXP Edge 95:
1.
Plug the DC/VBS cable to the back of the patient camera. Make sure the cable is
secure.
1 Power
Indicator
2 Power
Switch
3 Light
Switch
4 White Balance Button
5 Focus
Switch
6 Far
7 Near
8 Manual Iris Indicator
9 Iris
Button
10 Manual Iris Dial
11 Y/C
Port
12 LDC/VBS
Port
13 Serial
Number
2.
Plug in the other end of the DC/VBS cable and the power adaptor cord into the
AMD junction box as shown below:
3.
Connect one end of the S-Video cable to the AUX Input at the back of the codec.
Page 18 of 29
