MBTelehealth – Tandberg MXP Edge 95 User Guide
they may need to adjust their volume or you may need to adjust yours. Make
sure that the volume on the monitor is on. It should be adjusted to the halfway
point as shown below.
Screen/Monitor Volume Indicator
6.0 FAR END CONTROL
6.1 Site to Site
Taking Far End Camera Control allows you to move the camera at the far end site as
well as control their video sources and presets
during Site to Site calls only
. However,
you cannot save far end camera presets.
Before taking far end camera control, always request permission first and explain why
you are taking control. You may need to take far end camera control if:
There is an unskilled operator at the far end.
The operator requests that you take control.
If the operator isn’t able to facilitate the event at their end.
To use far end camera control during a call:
1.
Press the Far End button on the remote control.
2.
Move the camera to the desired position using the directional arrows on the
remote control. Zoom in and out on the person or item you want to see.
3.
Press the Far End button again to turn far end control off
6.2 Multi-Site
During Multi-Site calls, the Far End button allows you to control how the other sites are
displayed on your screen.
To split the screen in a multipoint session:
1.
Press the Far End button
on the remote control then toggle through the
layout options using the up arrow.
2.
Press the Far End button again to turn far end control off
Layout Options
Page 10 of 29
