Rev 11May2017
Page 16 of 19
MBTelehealth
- SX80 with Touchpad10 User Guide
Receiving and Ending Video Calls
TIP
Receiving Calls
Your Cisco SX80 with Touchpad 10 solution has been configured to
automatically accept all
incoming connection requests.
This means that both site to site connections initiated by
another site and multi-site connections will be automatically connected .
(note: Contact your FES to
confirm if your particular equipment has been configured this way)
You will hear a dial tone that indicates there is an incoming call and your microphone will
automatically mute so that the connecting site cannot overhear what you are discussing . Once
the connection is made, you will need to unmute your microphone so that the other site(s) can
hear you .
Ending Calls
At the completion of every call, press
End
to disconnect .
If you are participating in a multi-site event (3 or more participating sites) you will
be automatically connected by the MBTelehealth service desk at the scheduled start time .
Do not
attempt to connect to another location .
You will be automatically disconnected at the scheduled end time . ***There will be a 10 minute
warning prior to the disconnection .
When your unit accepts a call it turns the microphone off so you will need to ‘unmute” when your
session starts
.
Receiving and Ending Video Calls
