background image

KAIROS

 USER MANUAL

p.15

3.7 On-board computer mode

The on-board computer is able to adapt to different use scenarios, from switching to sports use.
To move between the available display modes, briefly press the "POWER" button (Ref. H - Figure 5).

3.7.1.  “RACE” MODE

It is the fifth screen in the home section.
In this screen the values in watts (w) of the motor power and cyclist power are expressed in full. (Figure 4.2) This mode of 
use is addressed to experienced users, and to a sporty use of the e-bike. (Figure 4.2)

1-

 POWER

Indicates the instantaneous power de-
livered by the motor in watts (w).

2-

 CYCLIST POWER

Indicates the instantaneous power ex-
pressed by the cyclist in watts (w).

3-

 POWER DISPLAY

Graphic display of the upper bar power: 
engine power lower bar: cyclist power.

4-

 ENERGY CONSUMPTION

Indicates the average energy consump-
tion in watt-hours per kilometer (Wh/
km), calculated since the last zeroing.

This data allows to adjust the level and five of 
the consumption of the eBike according to the 
need.
By calculating the ratio between this data and 
the capacity of the battery, the exact possible 
mileage data for each charge is obtained.

 

5-

 CADENCE

6-

 CURRENT SPEED

7-

 SERVICE LEVEL

battery 

capacity

=

÷

average

consumption

Passable 

km

FIG. 4.2

Summary of Contents for KAIROS 27,5












































Reviews: