KAIROS
USER MANUAL
p.37
8.3.2 Lubrication and chain tension control
It is important to periodically clean and lubricate the chain to avoid corrosion due to atmospheric agents.
1. Wipe the entire length of the meshes with a rag.
2. Spray on all meshes a special grease in spray for transmission chains.
CORRECT CHAIN LUBRICATION
Be extremely careful not to let the lu-
bricant go on the brakes or tires of the
bicycle. This can lead to the occurrence of
serious injuries!!
DANGER
Check the correct tension of the chain by placing the cam- bio
in the two different extreme positions allowed by the sprocket
pack.
8.3 Weekly maintenance and checks
8.3.1 Washing and cleaning
The cleaning of the pedal-assisted bicycle is not only a matter of decorum, but also allows you to immediately detect a
possible defect in the same.
In order not to damage or compromise the operation of the various components, especially the electrical parts, cleaning
must be carried out taking some precautions. It is absolutely forbidden to direct jets of pressurized water towards the
electrical parts, the motor and the battery, for which sponge washing is recommended.
Before starting the pedal-assisted bicycle, dry completely with low-pressure compressed air and check that there is no
residual moisture left on the electrical components.
8.3.3 Frame and bolt control
The load-bearing frame of the pedal-assisted bicycle and the welds must be free of visible defects such as: cracks, defor-
mations, incisions, corrosions, etc.
Make sure all the bolts of the pedal-assisted bicycle are tightly tightened.
ATTENTION
Brake adjustment should only be carried out by
authorized personnel.
8.2.3 Brake operation control
The brakes must be adjusted in such a way as to ensure effective braking and at the same time the control levers must
have an adequate stroke, in order to modulate the braking: in other words, the brakes must not be too slow or too pulled.
Check that brake system discs and pads are not contaminated with oils or soaps.
Check the effectiveness of the braking system on flat terrain and at low speeds. Check the wear of the brake pads annu-
ally by going to authorized personnel.