- 14 -
GB
D) Replacement of the electric resistance
Access the internal resistance (Fig. 8 Pos. B - Fig. 9 Pos. B) by opening the air conveyor and removing the external rear panel.
- Disconnect the resistance connection cables of the electric components.
- Disassemble the resistances by loosening the screws (Fig. 8 Pos. A - Fig. 9 Pos. A) from the inside - Then, reassemble the
new resistances by proceeding in reverse order and by using the wiring diagram.
E) Replacement of the internal glass
- Turn the glass locking devices (Fig.10 Pos. B).
- Open the internal glass and loosen the hinge fastening screws (Fig.10 Pos. A).
- Remove and replace the glass (Fig.10 Pos. C) and re-assemble the new one by proceeding in reverse order.
F) Cleaning solenoid valve filters
- Remove the rear panel.
- Remove the water supply pipe (Fig. 11 Pos. A).
- Take out the filter (Fig. 11 Pos. B) and wash it thoroughly.
- Fit it all back together.
Fig.8
Fig.9
Mod. 6-10
Mod. 20
A
A
B
A
A
B
Fig.10
A
B
Fig.11
A
B
