7
ASSEMBLY INSTRUCTIONS
1.As the unit has a large size, please assemble it in a space which is big
enough.
2.Open the packing box, take out the parts and remove packing
materials. Classify all parts and tidily put them on vacant floor.
3.Ensure that it's correctly assembled and the parts are complete
according to assembly steps.
4.It requires at least two persons.
I.Assemble Weight Cage
1.Attach front shroud, decorative strip and upper cap to tower frame.
2.Assemble weight plates. Insert two guide rods into the corresponding
mounting holes on the lower part of weight cage; pass them through shock
pads; pass them through weight plates successively.
3.Assemble head plate. Now the weight plates are assembled.
4.Assemble circlips on the upper parts of two guide rods; fix guide rods.
5.Pass steel cable through cord lock; fasten steel cable with screws.
①
Tighten the 3 screws as much as possible.
②
The bolt must make at least 10 turns towards the selector bar.
③
Tighten hexagon nut.
6.Assemble steel cable as the diagram shows; check whether all the
pulleys move smoothly.
7.Assemble rear shroud; fasten it to tower frame with designated screws.
8.Assemble water bottle holder; fasten it to tower frame with designated
screws.
9.Now the weight cage is assembled.
