Configuring your Router in the Remote Service Portal (V 2.x) | Page 77
of 90
12.7 NTP Server
Navigation: Administration > Projects > Project Gama (selected project) > GamaRouter (selected device) >
Services > NTP Server
The Network Time Protocol (NTP) is a standard for synchronizing clocks in computer systems via pack-
age-based communication networks.
The automatic time calibration takes place via an NTP server (preset address: 0.de.pool.ntp.org).
The overview shows:
•
Whether the NTP function is activated
•
The set NTP server (0.de.pool.ntp.org)
•
The polling interval in hours (2 hrs)
To change the settings, click on the Edit button
NTP Server
active
Checkbox for activating/deactivating the NTP
function.
NTP Server
Enter the NTP server here (preset address:
0.de.pool.ntp.org). You can enter a time server
IP address instead of a name.
If you enter a name, there must be a DNS
server entered in the network settings, or an
existing Internet connection.
The NTP server simply needs to be available.
NTP Interval
[h]
Enter the value (in hours) for the NTP polling
interval here.
Input => natural numbers [h] > 0.
A D V I C E
If you leave this blank or enter "0", there will be no time cali-
bration.
A D V I C E
Changes in the portal, which concern the device, will take effect after the Portal configuration has been
transferred to the device.
If the device configuration is out of date, this is indicated by a gray LED symbol before the device name
.