Page 16
of 90 | Version: 1.6.0 DR 03 (10.01.2017) - EN | 10.01.2017
10
Initial configuration
Because the mbNET.mini was designed as a portal device, the initial start-up takes place via the web portal
•
RSP mbCONNECT
24
V 2.x
oder
•
mbCONNECT24 V1.x
Generally following procedure applies:
•
Add the mbNET.mini in the portal as a new device.
•
Enter the necessary basic data, so that the device can connect to the portal (for example, device
name, network settings, connection information, etc.).
•
Transfer the device configuration from the portal into the mbNET.mini.
Alternatively, you can enter the necessary connection basic data direct on the web interface of the de-
vice (see chapter: Initial configuration via the web interface of the mbNET.mini).
