Mazda mx-5 2017, Owner'S Manual

Page: 196 / 568

4–82
When Driving
i-ACTIVSENSE
When the System Operates
1. The system goes on operation standby
when the LDWS switch is pressed and
the LDWS OFF indicator light in the
instrument cluster turns off.
2. Drive the vehicle in the center of the
driving lane while the LDWS OFF
indicator light is turned off. The system
becomes operational when all of the
following conditions are met.

The vehicle is driven in the center
of the driving lane with the white or
yellow lines on the left and right sides,
or on either side.

The vehicle speed is 65 km/h (41 mph)
or faster.

The vehicle is driven on a straight road
or road with gentle curves.
The LDWS does not operate in the
following cases:

The system cannot detect white or
yellow lines.

The vehicle speed is less than 60 km/h
(37 mph).

The vehicle is making a sharp turn.

The vehicle is making a curve at an
inadequate speed.
NOTE

The LDWS does not operate until the
system detects a white or yellow line on
either the left or right.

When the system detects a white or
yellow line on one side only, the system
will activate the warning only when the
vehicle deviates on the side where the
white or yellow line is being detected.

The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to Personalization Features on
page 9-9.
Auto cancel
In the following cases, the LDWS cancels
automatically and the LDWS warning
light in the instrument cluster turns on.

The temperature inside the camera is
high or low.

The windshield around the camera is
foggy.

The windshield around the camera is
blocked by an obstruction, causing poor
forward visibility.
The LDWS is enabled automatically when
the operation conditions are met, and the
LDWS warning light turns off.
MX-5_8FR4-EA-16J_Edition1.indb 82 2016/08/11 20:29:01