Mazda mx-5 2017 Owner'S Manual Download Page 499

Page: 499 / 568

7–65

If Trouble Arises

When the Roof Cannot be Closed

NOTE



The rear roof is locked completely if the

position where the rope is hooked is at

the rear end of the bracket groove in the

direction of the vehicle rear, as shown in

the figure, when viewed from the vehicle

interior.

Rope

Link pin



If the rear roof is not locked completely,

the trunk will not open even if the

remote release button, the electric trunk

lid opener, or the trunk button on the

transmitter is operated.

6. Do the same procedure on the other

side.

7. Open the trunk and tie the rope to the

trunk hinge.

Hinge

Rope

8. Tie off the other side rope the same

way.

9. Close the trunk lid.

After finishing the procedure

After finishing the procedure, have the

roof checked at an Authorized Mazda

Dealer as soon as possible.

WARNING

Drive the vehicle at a speed of 40 km/h

(24 mph) or lower before having the

roof checked at an Authorized Mazda

Dealer:

The front roof may open while t

hicle is being driven and cause an

accident.

MX-5_8FR4-EA-16J_Edition1.indb 65

2016/08/11 20:30:10

Summary of Contents for mx-5 2017

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mx-5 2017

Reviews:

Related manuals for mx-5 2017

Brands by name

Popular brands

Mazda mx-5 2017, Owner'S Manual

Search results

Summary of Contents for mx-5 2017

Reviews:

Related manuals for mx-5 2017

Brands by name

Popular brands