Mazda mx-5 2017 Owner'S Manual Download Page 202

Page: 202 / 568

4–88

When Driving

i-ACTIVSENSE



In the following cases, it may be difficult to view the illumination/flashing of the Blind

Spot Monitoring (BSM) warning lights equipped on the door mirrors.



Snow or ice is adhering to the door mirrors.



The door glass is fogged or covered in snow, frost or dirt.



The system switches to the Rear Cross Traffic Alert function when the shift lever (manual

transmission) or the selector lever (automatic transmission) is shifted to the reverse (R)

position.

Refer to Rear Cross Traffic Alert (RCTA) on page

4-92.

Blind Spot Monitoring (BSM) Warning Lights/Blind Spot Monitoring (BSM)

Warning Beep

The Blind Spot Monitoring (BSM) or Rear Cross Traffic Alert (RCTA) system notifies the

driver of the presence of vehicles in adjacent lanes to the rear of your vehicle using the

Blind Spot Monitoring (BSM) warning lights and the warning beep while the systems are

operational.

Blind Spot Monitoring (BSM) warning lights

The Blind Spot Monitoring (BSM) warning lights are equipped on the left and right door

mirrors. The warning lights turn on when a vehicle approaching from the rear in an adjacent

lane is detected.

When the ignition is switched ON, the malfunction warning light turns on momentarily and

then turns off after a few seconds.

Forward driving (Blind Spot Monitoring (BSM) system operation)

The Blind Spot Monitoring (BSM) system detects vehicles approaching from the rear and

turns on the Blind Spot Monitoring (BSM) warning lights equipped on the door mirrors

according to the conditions. Additionally, while a Blind Spot Monitoring (BSM) warning

light is illuminated, if the turn signal lever is operated to signal a turn in the direction

in which the Blind Spot Monitoring (BSM) warning light is illuminated, the Blind Spot

Monitoring (BSM) warning light flashes.

MX-5_8FR4-EA-16J_Edition1.indb 88

2016/08/11 20:29:02

Summary of Contents for mx-5 2017

























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for mx-5 2017

Reviews:

Related manuals for mx-5 2017

Brands by name

Popular brands

Mazda mx-5 2017, Owner'S Manual

Search results

Summary of Contents for mx-5 2017

Reviews:

Related manuals for mx-5 2017

Brands by name

Popular brands