Mazda mx-5 2017, Owner'S Manual

Page: 69 / 568

3–13
Before Driving
Doors and Locks
NOTE

The system can be set to unlock
both doors and the fuel-filler lid by
performing a single operation.
Refer to Personalization Features on
page 9-9.
Use the following procedure to change
the setting.
1. Switch the ignition off and close
both of the doors and the trunk lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
UNLOCK button on the key for 5
seconds or longer (the sound of
the doors locking/unlocking can be
heard).
After this, the system switches the
setting of pressing the driver's
request switch once or twice
to unlock both doors each time
the UNLOCK button is pressed
(the sound of the doors locking/
unlocking can be heard).
4. The setting change is completed by
doing any one of the following:

Switching the ignition to ACC or
ON.

Closing the driver's door.

Opening the trunk lid.

Not operating the key for 10
seconds.

Pressing any button except the
UNLOCK button on the key.

Pressing a request switch.

Confirm that both doors and the fuel-
filler lid are securely locked.

Both doors and the fuel-filler lid cannot
be locked when any door is open.

It may require a few seconds for the
doors to unlock after the request switch
is pressed.

A beep sound is heard for confirmation
when the doors and the fuel-filler lid
are locked/unlocked using the request
switch. If you prefer, the beep sound can
be turned off.
The volume of the beep sound can also
be changed. Refer to Personalization
Features on page 9-9.
Use the following procedure to change
the setting.
1. Switch the ignition off and close
both of the doors and the trunk lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
Both of the doors and the fuel-
filler lid lock and the beep sound
activates at the currently set volume.
The setting changes each time the
LOCK button on the key is pressed
and the beep sound activates at the
set volume. (If the beep sound has
been set to not activate, it will not
activate.)
4. The setting change is completed by
doing any one of the following:

Switching the ignition to ACC or
ON.

Closing the driver's door.

Opening the trunk lid.

Not operating the key for 10
seconds.

Pressing any button except the
LOCK button on the key.

Pressing a request switch.
MX-5_8FR4-EA-16J_Edition1.indb 13 2016/08/11 20:28:30