Mazda 2006 MX-5 Owner'S Manual Download Page 259

Page: 259 / 378

Black plate (259,1)

Starting a Flooded Engine

If the engine fails to start, it may be
flooded (excessive fuel in the engine).

Follow this procedure:

1. Depress the accelerator all the way and

hold it there.

2. Turn the ignition switch to the START

position and hold it there

―

for up to 10

seconds. If the engine starts, release the
key and accelerator immediately
because the engine will suddenly rev
up.

3. If the engine fails to start, crank it

without depressing the accelerator

―

for

up to 10 seconds.

In Case of an Emergency

Emergency Starting

7-21

MX-5_8U35-EA-05F_Edition2 Page259
Tuesday, June 14 2005 2:33 PM

Form No.8U35-EA-05F

Summary of Contents for 2006 MX-5



























































































































































































































































































































































































Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands

Mazda 2006 MX-5, Owner'S Manual

Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands