Mazda 2006 MX-5 Owner'S Manual Download Page 138

Page: 138 / 378

Black plate (138,1)

Ignition Switch

(With advanced key)

NOTE

When starting the engine using the
advanced key, refer to Starting the
Engine (page 3-10).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-16).

2. Make sure the start knob is in LOCK

position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

Ignition Switch Positions

With advanced
key

Without advanced
key

LOCK

The steering wheel locks to protect
against theft. Only in this position can the
key be removed.

Manual Transaxle Vehicle with
Advanced Key

Push the key

Auxiliary key

5-2

Driving Your Mazda

Starting and Driving

MX-5_8U35-EA-05F_Edition2 Page138
Tuesday, June 14 2005 2:31 PM

Form No.8U35-EA-05F

Summary of Contents for 2006 MX-5



























































































































































































































































































































































































Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands

Mazda 2006 MX-5, Owner'S Manual

Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands