Mazda 2006 MX-5 Owner'S Manual Download Page 105

Page: 105 / 378

Black plate (105,1)

4. Remove the seat belts from the belt

guides.

Belt guide

5. Slide the seats forward.

Refer to Seat Slide on page 2-2.

6. Fold the seatbacks forward.

Refer to Seat Recline on page 2-3.

7. Pull the levers and fully release the side

latches.

Side latch

Lever

8. After the side latches are fully released,

release the lever.

9. Lift the side latches while pulling the

lever. Make sure the hooks are fully
released.

Side
latch

Lever

Hook

10. Disconnect the cord.

11. Slide the hardtop rearward while

pressing down on the rear deck
latches to unlock the latches.

Hardtop

Rear deck latch

Knowing Your Mazda

Doors and Locks

3-47

MX-5_8U35-EA-05F_Edition2 Page105
Tuesday, June 14 2005 2:31 PM

Form No.8U35-EA-05F

Summary of Contents for 2006 MX-5



























































































































































































































































































































































































Search results

Summary of Contents for 2006 MX-5

Reviews:

Mazda 2006 MX-5, Owner'S Manual, Page: 105 / 378

Search results

Summary of Contents for 2006 MX-5

Reviews: