Mazda 2006 MX-5 Owner'S Manual Download Page 240

Page: 240 / 378

Black plate (240,1)

Parking in an Emergency

The hazard warning lights should always
be used when you stop on or near a
roadway.

The hazard warning lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.

Depress the hazard warning flasher and all
six turn signals will flash.

NOTE

The turn signals don't work when the
hazard warning lights are on.

Check local regulations about the use
of hazard warning lights while the
vehicle is being towed. They may
forbid it.

7-2

In Case of an Emergency

Parking in an Emergency

MX-5_8U35-EA-05F_Edition2 Page240
Tuesday, June 14 2005 2:33 PM

Form No.8U35-EA-05F

Summary of Contents for 2006 MX-5



























































































































































































































































































































































































Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands

Mazda 2006 MX-5, Owner'S Manual

Search results

Summary of Contents for 2006 MX-5

Reviews:

Related manuals for 2006 MX-5

Brands by name

Popular brands