Mazda 2006 MX-5, Owner'S Manual

Page: 160 / 378

Black plate (160,1)
Dynamic Stability Control
(DSC)
í
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.
Refer to ABS (page 5-7) and TCS (page
5-23).
WARNING
DSC and Unsafe Driving:
The dynamic stability control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident. So
don't rely on the dynamic stability
control as a substitute for safe driving.
CAUTION
l
The DSC may not operate correctly
unless the following are observed:
l
Use tires of the correct size
specified for your Mazda on all
four wheels.
l
Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
l
Do not mix worn tires.
l
The DSC may not operate correctly
when using tires where the tire
diameter is changed due to the
installation of tire chains, or when
installing a temporary tire.
l
If repair or replacement of the
steering or other surrounding
equipment is necessary, have it done
at an Authorized Mazda Dealer. If
the center position of the steering
deviates, the DSC may not operate
correctly because there is a sensor in
the steering which detects driving
conditions.
q
TCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS or DSC is
operating, the indicator light flashes.
5-24
Driving Your Mazda
í
Some models.
Starting and Driving
MX-5_8U35-EA-05F_Edition2 Page160
Tuesday, June 14 2005 2:31 PM
Form No.8U35-EA-05F