16
16023515
©2005 Maytag Services
Disassembly Procedures
To avoid risk of electrical shock, personal injury or
death; disconnect power and gas before servicing.
Oven/Safety Valve or
Elbow Block Assembly
Pilot Burner
Assembly
Bake Burner
Burner Baffle Plate
Thermostat
Sensor
Oven Cavity Gas Controls
Replacing Oven/Safety Valve
(Select Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door and remove baking racks.
4. Remove oven bottom plate, see "Replacing Oven
Bottom Plate" procedure.
5. Disconnect gas supply lines from oven/safety valve.
6. Remove screws securing oven/safety valve to rear
wall of oven cavity.
7. Remove oven/safety valve from oven cavity.
8. Reverse procedures to reassemble.
Replacing Bake Burner
(Select Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door and remove baking racks.
4. Remove oven bottom plate, see "Replacing Oven
Bottom Plate" procedure.
5. Remove screw securing baffle to burner.
6. Disconnect gas lines to oven and pilot burners.
7. Remove screws securing burner holder to oven
chassis.
8. Remove screws securing pilot burner assembly to
bake burner. Gently slide pilot assembly out.
9. Slide bake burner toward front of oven and remove.
10. Reverse procedures to reassemble.
Replacing Oven Pilot Burner
(Select Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door and remove baking racks.
4. Remove oven bottom plate, see "Replacing Oven
Bottom Plate" procedure.
5. Remove screw securing baffle to burner.
6. Disconnect gas lines to oven and pilot burners.
7. Remove screws securing burner holder to oven
chassis.
8. Remove screws securing pilot burner assembly to
bake burner.
9. Gently slide pilot assembly toward the front of the
oven to remove.
10. Reverse procedures to reassemble.
Replacing Oven Bottom Plate
(Select
Models)
1. Turn oven off.
2. Open oven door and remove baking racks.
3. Push oven bottom plate in, slide up, then pull plate
toward the front of the oven once the plate has
cleared the guide pins.
4. Slide oven bottom plate out of oven cavity.
5. Reverse procedures to reassemble.
Replacing Elbow Block Assembly
(Select
Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door and remove baking racks.
4. Remove oven bottom plate, see "Replacing Oven
Bottom Plate" procedure.
5. Disconnect gas supply line from elbow block
assembly.
6. Remove screws securing elbow block assembly to
rear wall of oven cavity.
7. Remove elbow block assembly from oven cavity.
8. Reverse procedures to reassemble.
Replacing Thermostat Sensor
(Select
Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Remove manifold assembly, see "Replacing Manifold
Assembly" procedure.
4. Remove screw securing oven control valve to
manifold.
5. Slide oven control valve from manifold assembly.
6. Reverse procedures to reassemble.
NOTE:
The individual sensor cannot be replaced. The
complete oven control valve assembly must be
replaced.
Replacing Oven Flue Box Assembly
(Select
Models)
1. Turn off and remove power from unit (if electric unit).
2. Turn off and remove gas supply from unit.
3. Open oven door and remove baking racks.
4. Remove screws securing bottom of oven flue box
assembly to rear wall of oven cavity.
