MAYAH FLASHMAN II, Operating Manual

Page: 74 / 91

Front panel user Interface > Menu structure
74
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
the DHCP function on your
FLASHMAN II (see chapter
CODEC/SETUP/INTERFACE/Ethernet ).
Note:
For most BGAN Terminals and subscriptions the following configuration options
can be left empty, use them
only if you know what you are doing.
In this menu it is also possible to predefine the following parameters for a BGAN
connection:
· PIN
· APN
· Password
The PIN, APN and password – if needed – should be entered and saved by
pressing OK before the BGAN Mode is set to 'on'.
For more information on BGAN functionality please consult the Application Note
32 on MAYAH's web site.
3.5.4.4.11 Export Configuration
This feature enables to export the whole configuration including phone book and
codec profiles to
· USB storage media (recommended)
· SD Card
· PC Card
· FTP server
Note:
Following FTP parameters can be set
·
FTP Client: Active / Passive (default)
·
Host: URL or IP-address of the FTP upload server
·
User
·
Password
·
Path: desired path at the FTP upload server (no path means 'root directory')
3.5.4.4.12 Import Configuration
The exported configuration (see item above) can be loaded onto the FLASHMAN
II with this feature in a similar manner as at Export config. For details see
chapter
Export config .
3.5.4.4.13 Ancillary Data
With a help of the RS232-USB adapter (see chapter Introduction/Useful
Accessories ) FLASHMAN II also can transmit/receive ancillary data.
To initiate the adapter it must be connected to a FLASHMAN II at start up. When
adapter is active a blue LED lights up on its body.